Canon EOS 7D Mark II Guía De Instrucciones página 49

Ocultar thumbs Ver también para EOS 7D Mark II:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Shutter Button
The shutter button has two steps. You can press the shutter button
halfway. Then you can further press the shutter button completely.
Preventing Camera Shake
Hand-held camera movement during the moment of exposure is called
camera shake. It can cause blurred pictures. To prevent camera shake,
note the following:
• Hold and steady the camera as shown on the preceding page.
• Press the shutter button halfway to autofocus, then slowly press the
shutter button completely.
In the <d> <s> <f> <a> <F> shooting modes, pressing the
<p> button will execute the same operation as pressing the shutter
button halfway.
If you press the shutter button completely without pressing it halfway first
or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
Even during menu display, image playback, or image recording, you can
go back to shooting-ready by pressing the shutter button halfway.
Pressing Halfway
This activates autofocusing and the
automatic exposure system that sets the
shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayed in the viewfinder
and on the LCD panel for 4 sec.
(metering timer/0).
Pressing Completely
This releases the shutter and takes the
picture.
Basic Operation
47

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido