Refrigerator Features; Refrigerator Shelves; Chiller Fresh System - Amana BR22S6E Manual De Uso

Refrigerator Features

To avoid property damage, confirm shelf is secure
before placing items on shelf.

Refrigerator Shelves

Shelves adjust to meet individual storage needs. Some
models feature Spillsaver
hold simple spills for easier cleaning. EasyGlide
shelves pull forward for easy access of items in back.
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
• Remove shelves by lifting front, releasing hooks
from metal track then pulling out.
• Replace shelves by inserting hooks into metal track
and lowering front.
A
B
A. Spillsaver shelf
Shelves
Caution
™ ™
shelves. Spillsaver shelves
™
Caution
B. Slide out shelf
™
Chiller Fresh System
The temperature controlled meat drawer features a
drawer inside a sleeve. Freezer air circulates between
drawer and sleeve. This systems keeps food fresh
longer and up to 5°F (3°C) colder than refrigerator
temperature.
Temperature controlled meat drawer control is located
below front shelf trim. Control adjusts amount of air
circulating around drawer. Slide control to COLD for
normal refrigerator temperature and to COLDER for
colder temperature. Ice crystals may form on drawer or
food on COLDER setting. Cold air entering the meat
drawer can decrease refrigerator temperature.
Refrigerator control may need to be adjusted to a lower
number to compensate for colder air. Temperature
controlled meat drawer can be moved from the left to the
right side of the refrigerator compartment to accomodate
different storage needs. To move drawer perform the
following steps:
1. Remove drawer by lifting and pulling out. Remove
shelf by lifting from front, releasing hooks from metal
track, then pulling out.
2. Remove plastic cap from back wall of refrigerator
section by placing a knife covered with masking tape
underneath cap and pulling forward.
A. Air inlet
C. Sleeve
Chiller position
3. Rotate boot 180° to opposite side.
4. Insert plastic cap in opposite side of refrigerator
section. Confirm cap is snugly in place. Cold air may
cause food to freeze if cap is not replaced.
9
A
B
C
B. Boot