Install The Software - Matrox m3D Guia De Instalacion

Insert your Matrox card
3
Remove the bracket cover for the slot
you intend to use. Save the screw for
the mounting bracket. Position your
Matrox card over the PCI expansion
slot you've chosen. Push the card in
firmly and evenly until it's fully
seated in the slot. Replace the screw
to secure the bracket of your Matrox
card to the computer.
Restart your computer
4
When your computer restarts, Windows 95 detects new hardware. The dialog box
you see depends on the version of Windows 95 you have:
If you see the
then . (The driver is installed in
OK
If you see the

Install the software

5
Insert the CD-ROM in your CD-ROM drive – the mgasetup program automatically
a
starts.
Select the language you want to use, then click
b
To see notes on the contents of the CD-ROM, click
c
click .
Next
New Hardware Found
Update Device Driver Wizard
Bracket screw
PCI
slot
Motherboard
dialog box, click "
step 5.)
dialog box, click
.
Next
View ReadMe
m3D
card
Do not install a driver
, then
Next Finish
. To continue,
(ENGLISH)
",
.
5