With Latch - Graco NAUTILUS Manual De Instrucciones

11.3 With LATCH

Do not use the lower anchors of the child restraint
anchorage system (LATCH system) to attach this
child restraint when restraining a child weighing
more than 42 lbs (19 kg) with the internal harnesses
of the child restraint. NOTE: Some vehicle
manufacturers have lower maximum weight ratings
for LATCH anchors, so you must consult your vehicle
owner's manual or call the vehicle manufacturer to
confirm the limits on your vehicle's LATCH anchors.
1. Unhook LATCH from storage bars on the sides of
the seat. For ease of installation, extend LATCH to
its maximum length.
2. Place the child restraint firmly against the back of
a forward-facing vehicle seat.
3. Hook LATCH Connectors to vehicle lower
anchors . Pull firmly on Connectors
to be sure they are attached. Belt must
lay flat and not be twisted.
4. Tighten LATCH by pushing down hard on
child restraint and pulling the adjustment belt .
5. If you need to remove LATCH to readjust,
push button on LATCH buckle to loosen strap.
38