Fellowes Cambio Manual Del Usuario página 4

STEP 3
Assemble the lift columns
• Remove the tabletop for further installation.
• Insert the two lifting columns into the two ends of the crossbar with the heads
of the lifting columns facing inward. Make sure the mounting holes in the lifting
columns completely align with the screw holes on the crossbar.
• Fix the lifting column and the side bracket with crossbar using 4 M6x10 Hex
Head screws with the Hex key.
• Repeat the same process to assemble the other lifting column.
STEP 4
Assemble the feet
• Place the foot on the bottom of the lifting column. Align the mounting holes on the
foot with the screw holes on the lifting column.
• Fix the foot using 4 M6x16 Hex Head screws with the Hex key.
• Repeat the same process to assemble the other foot.
• Retighten all the hex head screws to finish the adjustment.
STEP 5
Assemble the fixing plate
• Align the mounting holes on the fixing plate with the screw holes as shown.
• Attach the fixing plate on the center of the crossbar with 2 Phillips Head screws using a Phillips screwdriver. The fixing plate can be attached to
either the right side or the left side.
*Note: The arrow on the fixing plate indicates the direction of sliding in the control box. Follow the direction of the arrow to mount the control box in the next step.
4
F
E
O
K
O
P
D
OR