PROPAIN 000871-AD Instrucciones De Montaje página 57

CATEGORY 3: COMPONENTS WHICH CAN ONLY BE REPLACED AFTER APPROVAL BY PROPAIN OR THE COMPONENT MANUFACTURER
• Crank (provided that the distance between crank – centre of the frame (Q factor) is observed)
• Wheel (provided that the ETRTO is observed)
• Chain/belt (provided that the original width is observed)
• Rim tape (rim tape and rim must be compatible with each other. Modified combinations may result in rim tape shifting and thus in defective inner tubes.)
• Tyres (stronger acceleration, additional weight and more dynamic cornering require the use of tyres approved for e-bike use. It is important to observe the ETRTO.)
• Brake cables/brake hoses
• Brake pads
• Handlebar and stem (provided that there is no need to change the length of cables and/or hoses.)
• Saddle and seat post (provided that the offset to the rear does not exceed 20 mm compared to the original saddle/seat post combination. A modified load distribution beyond the intended adjustment
range may possibly lead to critical steering properties. The length of the saddle rails and the shape of the saddle are also important.)
• Headlight (headlights are designed for a specific voltage which must be compatible with the battery pack of the respective e-bike. In addition, the electromagnetic compatibility (EMC) must be
guaranteed, whereas the headlight may be responsible for a part of the potential disturbance.)