Press ENTER to confirm.
Select the desired volume of aspirated air for each sampling by pressing the "UP" or "DOWN" arrows.
Press the ENTER button to go to the next digit.
The maximum aspirated volume of cycle is 1999 litres.
Press ENTER to confirm.
The display will show the TOTAL volume of air to be aspirated at the end of the cycles.
Check if it is correct volume.
If not, touch the CLEAR button and start again.
For example if you set 5 cycles of 200 litres each, you will aspirate 1000 litres of air.
Press ENTER to confirm and save the configuration.
"POWER OFF" function
Press MENU and select POWER OFF function by pressing the "UP" or "DOWN" arrows.
Press ENTER to switch the instrument off.
Note: The instrument will automatically switch off after 5 minutes.
Operations
Adjustable plate holders
26
SINGLE RUN VOLUME
[ 0000 ] Litres
^
CLEAR
TOTAL RUN
RECORD MODE
[ 1000 ] Litres
CLEAR
MENU'
POWER OFF
CLEAR
ENTER
ENTER
ENTER