Ce Marking; National Restrictions - Cisco LINKSYS Wireless-G WPSM54G Manual Del Usuario

Appendix D
The following standards were applied during the
assessment of the product against the requirements of
the Directive 1999/5/EC:
Radio: EN 300 328 and/or EN 301 893 as applicable
•
EMC: EN 301 489-1, EN 301 489-17
•
Safety: EN 60950 and either EN 50385 or EN 50371
•
Dynamic Frequency Selection (DFS) and Transmit Power
Control (TPC) are required for operation in the 5 GHz
band .
DFS: The equipment meets the DFS requirements as
defined in ETSI EN 301 893 . This feature is required by
the regulations to avoid interference with Radio Location
Services (radars) .
TPC: For operation in the 5 GHz band, the maximum power
level is 3 dB or more below the applicable limit . As such,
TPC is not required .

CE Marking

For the Linksys Wireless-N, -G, -B, and/or -A products,
the following CE mark, notified body number (where
applicable), and class 2 identifier are added to the
equipment .
or
or
or
Check the CE label on the product to find out which
notified body was involved during the assessment .
Wireless-G PrintServer
Regulatory Information

National Restrictions

This product may be used in all EU countries (and other
countries following the EU directive 1999/5/EC) without
any limitation except for the countries mentioned below:
Ce produit peut être utilisé dans tous les pays de l'UE (et dans
tous les pays ayant transposés la directive 1999/5/CE) sans
aucune limitation, excepté pour les pays mentionnés ci-
dessous:
Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti
gli altri paesi che seguono le direttive EU 1999/5/EC) senza
nessuna limitazione, eccetto per i paesii menzionati di
seguito:
Das Produkt kann in allen EU Staaten ohne Einschränkungen
eingesetzt werden (sowie in anderen Staaten die der EU
Direktive 1999/5/CE folgen) mit Außnahme der folgenden
aufgeführten Staaten:
In the majority of the EU and other European countries,
the 2,4- and 5-GHz bands have been made available
for the use of wireless local area networks (LANs) . The
table labeled "Overview of Regulatory Requirements for
Wireless LANs" provides an overview of the regulatory
requirements applicable for the 2,4- and 5-GHz bands .
Later in this document you will find an overview of
countries in which additional restrictions or requirements
or both are applicable .
The requirements for any country may evolve . Linksys
recommends that you check with the local authorities for
the latest status of their national regulations for both the
2,4- and 5-GHz wireless LANs .
Overview of Regulatory Requirements for Wireless LANs
Frequency Max Power Level
Band (MHz) (EIRP) (mW)
2400-2483 .5 100
5150-5350 200
†
5470-5725 1000
†
Dynamic Frequency Selection and Transmit Power Control are
†
required in the frequency ranges of 5250-5350 MHz and 5470-5725
MHz .
The following countries have restrictions and/or
requirements in addition to those given in the table
labeled "Overview of Regulatory Requirements for
Wireless LANs":
Denmark
In Denmark, the band 5150 - 5350 MHz is also allowed for
outdoor usage .
I Danmark må frekvensbåndet 5150 - 5350 også anvendes
udendørs.
Indoor Indoor &
ONLY Outdoor
X
X
X
20