Publicidad
Idiomas disponibles
Idiomas disponibles
OSD MANAGEMENT
Advanced settings are available by joystick on the cable
Up
Move up / increase values
Down
Move down / decrease values
Left
Open sub-menu
Right
Close sub-menu
Enter
Enter menu and confirm selection
Setup item
Description
LENS
Manual Lens & Auto Iris Lens Setting
MANUAL
This function is for normal lens or vari-focal lens like this camera serie.
System automatically adjusts the iris level to control the brightness. This function is valid only for Auto Iris lens and
AUTO
not available with this camera series.
SHUTTER / AGC
Shutter speed & AGC setting, it determines the image brightness under low lux or bright condition
AUTO
Mode and brightness setting of the HIGH / LOW LUMINANCE
MANUAL
Parameter of the mode, shutter and AGC
WHITE BAL
White balance mode setting, it determines the way the color is produced
ANTI CR
Color Rolling suppress
MANUAL
Manually adjust the white balance
Press OSD ENTER button to lock the current white balance, once it is locked, the white balance will not operate even
PUSH LOCK
when light temperature is changed.
ATW
Auto Trace White
PUSH
Similar to ATW, but system will force to track white balance continuously
USER1
User define white balance #1
USER2
User define white balance #2
BACKLIGHT
Backlight setting
OFF
Default Setting
BLC
Back light compensation
HLC
High light compensation
PICT ADJUST
Basic image adjustment such as hue, saturation, contrast, sharpness
MIRROR
ON/OFF, Flip image horizontally
BRIGHTNESS
0-255, Brightness (Default: 0)
CONTRAST
0-255, Contrast (Default: 128)
SHARPNESS
0-255, Sharpness (Default: 128)
HUE
0-255, Color Hue (Default: 102 for NTSC, 108 for PAL)
GAIN
0-255, Color Saturation (Default: 128)
ATR
Adaptive tone reproduction, software WD setting
MOTION DET
Motion detect function, sense area, sensitivity setting
PRIVACY
Privacy mask, color, transparency setting
DAY / NIGHT
Color / Mono / Auto Mode setting
AUTO
Auto Mode
COLOR
Color mode
B/W
Black and White mode
NR
Noise Reduction setting
NR MODE
Noise reduction mode adjustment
Y LEVEL
Luminance noise reduction (Default: 4)
C LEVEL
Color noise reduction (Default: 4)
CAMERA ID
Camera ID Setting
CHR1/CHR2
Default characters and User define characters (maximum of 40)
Move the location of the cursors
←→↑↓
CLR
Clear the highlight character & move to next character
POS
Use OSD UP/DOWN/LEFT/RIGHT button to adjust the ID locations
LANGUAGE
OSD Language Setting, total of 8 languages available
CAMERA RESET
Reset OSD setting
EXIT
Leave OSD Menu
7
Publicidad
