Safety Considerations - RS Pro RSPD3303X Manual De Instrucciones

Safety Considerations

To ensure that the instrument can work normally, please conduct necessary inspection
before using the power supply
Input Power Requirement
The power supply allows a 50Hz/60Hz frequency, and four levels of AC power:
100V/120V/220V/230V. You can select the required power voltage with the "DIP Switch" at
the rear panel according to the actual demand.
Warning
To switch to the required power voltage, please disconnect the power cord first.
Electrical Check
Please uses the power cord provided and connect the instrument to AC power. Check the
power by following:
1. Connect the power supply
Warning
To avoid electric shock, please make sure that the instrument
correctly.
2. Turn on the power switch
Press the button POWER to enter boot interface, and the system will return to default
settings.
8
is grounded