45-Kfa-Eu And 70T-Kfa-Eu Assembly - Protemp PT- 45-KFA-EU Manual De Usuario E Instrucciones De Funcionamiento

- Remove the heater and all packaging materials
from the shipping carton
Cord Wraps (2)
Carry Handle Assembly
1. Align holes in the upper housing with the 2
holes in the handle as shown in Figure 3.
2. Insert screws and tighten firmly.
Figure 3
© 2016, Obelis S.A
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
®
Assembly Instructions
Models: PT-45-KFA-EU / PT-70T-KFA-EU
What's In The Box
Carry Handle (1)
Note: Save the box and packaging materials
for future storage.
Cord Wrap Assembly
1. Insert tabs into square slots in shell support
and line up screw holes as shown in Figure 4.
2. Insert screws and tighten firmly.
Tools Needed:
- Phillips Head Screw Driver
Figure 4
Kerosene Forced Air Heater User's Manual
4
Black Screws (4)