Genius 1400 DP - E Libretto Uso E Manutenzione página 53

C 204
All machine functions stop
All machine functions stop, except
F 205
the traction system.
F 215
All machine functions stop, except
the traction system.
F 500
The display is flashing.
C 999
The machine does not start.
CPUU
The display is flashing.
AC50
The display is flashing.
Oil
Flashing display
English
The temperature of the centre
brush electronic control circuits is
very high.
The battery is flat.
The battery is flat.
The centre brush is worn.
The red key for disabling the self-
braking function has
removed. Possible
affecting the cables of the traction
motor.
The waste bin is full.
Excessive power draw or centre
brush lock.
The oil in the endothermic engine
must be replaced
- 28 -
See remedy for code
Recharge the battery (see the
Maintenance chapter). This code
applies to the acid battery.
See the remedy for code F 205.
This code applies to the gel battery.
Replace the brush.
Turn the machine off. Insert the red
been key and turn it clockwise. Check
problem the cables of the traction motor.
Empty the waste bin.
Check smoothness of brush
movements and locate any
obstructions (rope,nylon,etc..)
Replace the lubricating oil in the
engine, following the instructions
given in the use and maintenance
handbook. After replacing , reset
the partial working hour meter.
C 104.