Greenlee 180XL Manual De Instrucciones página 2

Operation
1. Slide the switch to first position (MOD) to place
the 180XL in modulation mode. The green LED will
flash indicating modulation mode.
2. Slide the switch to the next position (ON) to set the
VFL to CW mode. The green LED will indicate CW
mode by remaining on all of the time.
3. When the LED flashes red, the batteries are low
and must be replaced.
Applications
Continuity check
Break in fiber
Macrobend loss
Dirty connectors
The 180XL Visual Fault Locator is designed to quickly
locate breaks in optical fibers. Any interruption in
continuity will be indicated by red light escaping from
the fiber. Light can also escape from the fiber if it is
stressed or bent too tightly. In either case, escaping
light is a sure sign of a problem.
Cleaning the Output Port
Cleaning all connectors before coupling them to
the 180XL Visual Fault Finder will ensure proper
maintenance of the output port and laser lens. Users
should always cover the output port with the dust cap
when the instrument is not in use.
If binding or stickiness is felt when inserting
connectors into the output port, the ceramic sleeve
should be cleaned. To clean the sleeve, insert a
Greenlee 946 cleaning wand into the output port until
it stops. Twist the wand, remove it, and discard. Do not
reuse the cleaning wand.
Note: Do not blow air into the output port to remove
dirt particles. Doing so will only pack the dirt and make
it harder to remove.
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070
An ISO 9001 Company • Greenlee Textron Inc. is a subsidiary of Textron Inc.
USA Canada
Tel: 800-435-0786 Tel: 800-435-0786
Fax: 800-451-2632 Fax: 800-524-2853
www.greenlee.com
Specifications
International
Tel: +1-815-397-7070
Fax: +1-815-397-9247
Wavelength
Emitter Type
Output Power
Range
Laser Classification
Modes of Operation CW and 2 Hz modulation
Method of Display
Operation
Fiber Type
Connector Interface 2.5 mm universal,
Battery
Battery Life
Weight (without
batteries)
Dimensions
Operating
Temperature
Storage
Temperature
Certifications
Pour obtenir un manuel d'instruction en Français, visitez le site
www.greenlee.com. Cliquez sur « Manuals » dans la barre située au bas
de l' é cran. Saisissez "180XL" dans le champ de recherche et cliquez sur
« SEARCH ». Le manuel apparaît dans la liste en dessous.
Per consultare il manuale di istruzioni in italiano, visitare il sito
www.greenlee.com. Fare clic su "Manuals", sulla barra nella parte
inferiore dello schermo. Inserire la stringa "180XL" nel campo di ricerca e
fare clic su "SEARCH". Il manuale verrà visualizzato nell' e lenco in basso.
Die Bedienungsanleitung auf Deutsch finden Sie auf www.greenlee.
com. Klicken Sie auf „Manuals" in der Leiste unten auf dem Bildschirm.
Geben Sie „180XL" in das Suchfeld ein und klicken Sie auf „SEARCH".
Die Anleitung erscheint in der nachfolgenden Liste.
Para obtener un manual de instrucciones en Español, visite
www.greenlee.com. Haga clic en "Manuals" en la barra en la parte
inferior de la pantalla. Ingrese "180XL" en el campo de búsqueda y luego
haga clic en "SEARCH". Este manual aparecerá en la lista a continuación.
Para o manual de instruções em Português, visite www.greenlee.
com. Clique na opção "Manuals", localizada na barra na parte inferior da
tela. Insira "180XL" no campo de busca e clique em "SEARCH". O manual
aparecerá na lista abaixo.
Инструкции по эксплуатации на вашем языке Английский можно
найти на веб-сайте www.greenlee.com. Щелкните «Manuals» в
нижней части экрана. Введите «180XL» в поле поиска и нажмите
кнопку «SEARCH». Инструкции появятся в списке ниже.
650 nm ±10 nm
Fabry Perot
0 dBm (1 mW)
7 km
Class 2
Green/Red LED
Singlemode, multimode
optional 1.25 mm adapter
AA (2)
80 hours with 3.9 Wh
batteries
70 g (0.15 lb)
180 mm x 23 mm
(7.08" x 0.91") dia.
-10 °C to +45 °C
(14 °F to 113 °F)
-40 °C to +70 °C
(-40 °F to 158 °F)
CE, FCC, CDRH, WEEE