Wolf KGXD 39239 Serie Instrucciones De Montaje página 25

KGXD - 110 - 1000 horizontal
One side of the casing must be decided to attach the sepa-
rate plate elements (the assembly space must be at least as
wide as the plate elements). The cladding panels, stop rails
and supports must then be dismantled from it. The cladding
panels should now first be dismantled from this side.
Notice: the condensate pan cannot be walked on.
Mark the position of the intermediate stop rails on the floor or
ceiling (due to refitting)
Attention: Intermediate stop rails can differ from one another
(e.g. with door-lock etc.).
Dismantle the intermediate stop rails.
The intermediate stop rail onto which the supports are bolted
is dismantled in one piece.
3062937_201508 25