Wolf KGXD 39239 Serie Instrucciones De Montaje página 28

28
KGXD - 110 - 1000 horizontal
Insert the bypass sheets with the open side facing upwards.
Align them flush against one another and against the plate
element.
If the cover sags due to the span, this should be supported
(e.g. with the help of a car jack).
Bolt the intermediate stop rail with the supports again.
Install the individual support at the device partition on the
left again.
Fix the louvre flap again. When doing so, do not screw from
the bypass side as there is a danger of blocking the flap
linkage.
Closed if no recirculating
air flap is available
Closed
3062937_201508