Safety Warning; Warnings For The Installer - Palazzetti Ecofire TWIGGY Manual De Instalación Y Mantenimiento

2

SAFETY WARNING

2.1

Warnings for the installer

Observe the prescriptions contained in
this manual.
The instructions for assembly
and disassembly of the appli-
ance are reserved for specialist
technicians only.
The installation, use and maintenance
of the product must be performed in
accordance with the manufacturer's
provisions and in compliance with the
regulations. Failure to comply with the
instructions provided and incorrect op-
erations may cause dangerous situa-
tions, damage to property, persons, ani-
mals, health problems or malfunctions.
Installation, electrical connection, veri-
fication of operation and maintenance
must only be performed by authorised
and qualified personnel.
Installation and maintenance of the
product must be carried out exclusively
by qualified personnel with adequate
knowledge of the actual product. Use
only original spare parts recommend-
ed by the manufacturer.
Responsibility for the works carried out
in the location of the appliance is, and
remains, with the user; the latter is also
responsible for carrying out the checks
relating to the proposed installation
solutions.
The installer must comply with all
local, national and European safety
regulations.
The appliance must be installed on
floors with adequate load bearing
capacity.
004771070 - 17/11/2020
ITALIANO ENGLISH DEUTSCH
Check that the chimney flue
and air inlet set-ups conform to
the type of installation.
Do not carry out on-the-fly electrical
connections with temporary or uninsu-
lated cables.
Check that the earthing of the electri-
cal system is efficient.
Before starting the assembly or dis-
assembly phases of the appliance,
the installer must observe the safety
precautions required by law and the
following indications in particular:
• do not operate in adverse conditions;
• the installer must operate in perfect
psychophysical conditions and must
check that the personal protective
equipment is intact and functioning
perfectly;
• they must wear gloves and safety
shoes;
• they must use tools with electrical
insulation;
• they must make sure that the area
used during assembly/dismantling is
free from obstacles.
Install the product in rooms that are
not at risk of fire and equipped with all
the services such as power supplies (air
and electricity) and fumes exhaust.
Evaluate the static conditions of the
surface on which the weight of the
product will rest and provide adequate
insulation if it is made of flammable
material (e.g. wood, carpet, plastic).
Live electrical parts: only power the
product after completing its assembly.
FRANÇAIS ESPAÑOL
37