Palazzetti Ecofire TWIGGY Manual De Instalación Y Mantenimiento página 49

6.2.2 Single wall pipe and room air intake
In this case the combustion air will be drawn
from the environment (Fig. 18).
To achieve this:
• Remove the coaxial pipe.
• Join the aesthetic collar (A) to the support ring
(B) using the 6 nuts supplied and align the as-
sembly with the top by adjusting the nuts.
• Connect the smoke outlet pipe (C).
C
A
B
6.2.3 Single wall pipe and air intake
connected to the outside
In this case the combustion air will be taken di-
rectly from outside via the rear of the stove.
After carrying out the operations in the para-
graph Single wall pipe and room air intake:
• Open the door and turn the screws to remove
the left side (A - Fig. 19).
• Remove the combustion air connection hose
(B) and insert the 90° bend (C) supplied in its
place (Fig. 20).
• Remove the pre-cut sheet metal (D) from the
back plate. Connect the combustion air hose
(B) to the 90° bend, passing it through the free
hole in the back plate and then connecting it to
an external air intake. Connect the smoke out-
let pipe (F - Fig. 21).
• Refit the left side.
004771070 - 17/11/2020
ITALIANO ENGLISH
Fig. 18
DEUTSCH FRANÇAIS
F
D
B
ESPAÑOL
A
Fig. 19
C
B
Fig. 20
Fig. 21
49