Abus FUMO50000 Manual De Instalación página 22

analogue control centre protocols.
The module is installed on the inside of the alarm panel. The motherboard includes a
plug connector designed for this purpose. The external antenna cable is connected
directly to the module. The module can be operated using its built in internal PCB
mounted antenna or external antenna. The switching is carried out in the 'Installation
menu'  'System'  'Hardware'  'GSM antenna' (internal/external)

Before you begin the installation, please check whether the selected
service provider and installation location of the Secvest wireless
alarm system, as well as the potential position of the antenna, are
Note
suitable for GSM transmission.

In principle we recommend the use of contract cards in order to
ensure a secure transmission. Prepaid cards will not work without
sufficient credit.

The external antenna – which is used to improve poor GSM levels –
may only be installed outside of the alarm panel. As the module
already has an internal antenna, this is optional but its use is
recommended.

Incorrect or unclean installation work may lead to erroneous
interpretation of signals. The consequences of which may include
false alarms. The costs incurred by potential dispatches of rescue
services, such as the fire service or police, must be borne by the
operator of the system.

The alarm panel must be powered off to install the module, and in
order to do this the backup battery must be unplugged. No liability is
accepted for any damage caused in the event of non-observance.
Caution
Any guarantee claims will also be invalidated in the event of non-
observance.
Disposal | Conformity
22