Marantz professional STUDIO SCOPE 4 Guia Del Usuario página 5

Precautions
•
Connections: Your Studio Scope 4 loudspeakers have a variety of inputs for use with a multitude of
devices. Soundcards or other devices with RCA line outputs can be connected to the RCA inputs on your
left loudspeaker's back panel. If your soundcard or portable music player has an 1/8" output, you can
connect it to the front panel aux input, using the provided 1/8" to 1/8" cable.
•
Correct Power Operation: Since the Studio Scope 4 contains amplifiers, it must be
connected to a power outlet. Before connecting power, please make sure that the
On/Off switch on the back of the Studio Scope 4 is set to the off position.
•
Acoustic/Traction Pads: In order to minimize vibrations and maximize physical
stability, we recommend you use the provided acoustic/traction pads on the bottoms
of the Studio Scope 4 loudspeakers.
•
Speaker Wire Connections: Use the red and black cable included in the Studio
Scope 4 package to connect the Left and Right loudspeakers via the red/black
spring-clip terminals on the back of each loudspeaker.
•
Connecting to a Computer Sound Card or Other Audio Output Device: Before connecting the
Studio Scope 4 loudspeakers, make sure the power from the computer or other output device has been
turned off and the Studio Scope 4 system is also turned off. Connect the RCA input jacks to the
corresponding output connectors of a computer sound card, portable music player, etc. You can also
use the 1/8" stereo mini cable to connect a secondary audio device to the "Aux" input on the front of the
Studio Scope 4.
5