Jacuzzi JMC16 Manual De Instalación Y Funcionamiento página 11

Typical Media Filter Installation
1. Position the media filter as close to the Swimming Pool / Spa as possible.
2. Position the media filter so that it is free from flooding, away from sumps, guttering, garden
hollows, etc.
3. Position the media filter so that the piping connections purge valve and air release valve is
convenient and accessible for operation, servicing and winterizing.
4. Ensure that the compliance label is facing the front to allow easy identification.
5. The media filter should be placed on a level concrete slab, very firm ground, or equivalent.
Ensure that the ground will not subside, preventing any strain from the attached plumbing.
6. Ensure that there is no movement of the media filter during operation of the Purge valve.
7. Allow sufficient clearance around the media filter to permit visual inspection of the entire
system.
*NOTE: DE FILTERS REQUIRE A BYPASS
Typical Installation with a Media Filter
Typical installation with a DE Filter
*Optional DE By-pass Kit
Typical Installation with a Cartridge Filter
JMC16 | pg 09