2
Suitable Mounting Locations
Mount the 3 Zone Control Panel near the HVAC equipment (see Figure 2). The panel can be mounted in any
orientation on a wall, stud, roof truss, or the return-air plenum. For appearance, mount the panel level.
Remove the panel cover and use the base as a template to drill mounting holes 6.5" apart (see Figure 3).
Attach the panel with appropriate screws (not included). Use mounting anchors as needed for drywall or
plaster installations.
typical mounting location
return air
ducts
return air
plenum
bypass
duct
electric or
barometric
bypass damper
filtration
system
Figure 2
zone dampers
supply air
sensor
coil
furnace
Figure 3
3
6.50"