Liemke MERLIN–13 Manual De Instrucciones página 22

Installation
> Install the threaded adapter insert (8) to the
MERLIN-13 by rotating clockwise along the thread.
> Rotate the eyepiece locking ring (6) counter-
clockwise to lock the adapter insert (8).
> Install the threaded insert (8) fully into the clip-on
adapter (9).
> For mounting the clip-on adapter (9) on the rifle-
scope, please observe the instructions for use of
the manufacturer of the clip-on adapter.
TIPS!
> If the MERLIN-13 is rotated in the
wrong position when istalled, change
the rotational position by adjusting
the eyepiece locking ring.
> A thread adapter with a M52 x 0.75
male thread is supplied with the
MERLIN-13.