Liemke MERLIN–13 Manual De Instrucciones página 25

> Press P button (2) and M button (4) simultaneously
to switch the movement directions.
> While switched to horizontal movement, press P
button (2) to move towards left and M button (4)
to move towards right. Movement method is same
as vertical on Y-axis.
> Long press the P button 2) and M button (4) simul-
taneously to save calibration data. Once saved,
the device will exit this interface after 2s.
TIP!
> Without button input, the device will
exit image movement interface after
30s, without saving.
MERLIN –13 · Operating Manual 11 / 2020
E
N
10
–
11