Diagrama De Flujo De Los Parámetros De Entrada Si Se Utiliza Zp-001T - Toa M-9000M2 Instrucciones De Instalación Y De Funcionamiento

10.2.2. Diagrama de flujo de los parámetros de entrada si se utiliza ZP-001T.
INPUT SELECT
Normal use state 1
0 1 - S C E N E 1 I N 1 - I N 1 : O F F
(p.63-A28)
To/from lowermost screen
(p.56-A1)
INPUT SELECT
I-ON/OFF
1
I N 1 - I N 1 : O N 0. 0
or P
: -∞, -70 to +10 (0.5 dB steps)
IN
(p.56-A2)
I N 1 P : Selects characters to enter.
- - - - - - - -
(Right shift key): Moves the cursor to the right.
(p.62-A24)
-
P R E P A G I N G O F F P or I-ON/OFF : ON/OFF
(p.62-A25)
M O D E => P A G I N G P O R T P : RINGING SIGNAL, PAGING PORT
(p.62-A26) (p.59-A13)
P R I O R I T Y 2 D U C K E R - D E P T H
P : 1, 2, 3 P : OFF, -50, -40, -30, -20, -10, 0 (dB)
(p.62-A27)
P A G I N G T I M E 3 0 P : 30 (sec), 10 (m)
(p.63-A29)
P A G I N G : M A N U A L G R P 0 1 I N 1 -> M A N U
P : 01 to 32
P
(p.63-A29)
P A G I N G : AUTO G R P 0 1 I N 1 -> O U T 1
P : 01 to 32
P
(p.63-A31)
P A G I N G : Z O N E G R O U P 1 G R P 0 1 I N 1 -> O U T 1
P : 1 to 8
To/from uppermost screen
: Cycles meter display (FADER /LEVEL) below
the setting screen each time pressed.
O F F
(p.63-A30)
P A G I N G : I N 1 -> O U T 1
P : Selects OUT.
O-ON/OFF : Confirms the setting.
(p.63-A32)
(p.63-A33)
1 G R P 0 1 I N 1 -> O U T 1 1 G R P 0 1
P : 01 to 32
O-ON/OFF
The screen display examples may differ from actual displays.
The on-screen indications shown in blue are variable parameters
by key operation.
The symbols in the figure represent the following key operation.
: Screen shift keys (up and down)
: Screen shift key (right) or ENTER key
: Screen shift key (left) or ESC key
: PARAMETER knob
P
IN : INPUT VOLUME knob
: Input channel ON/OFF key
I-ON/OFF
: Output channel ON/OFF key
O-ON/OFF
(p.60-A18)
P A G I N G S Y N C O F F
P
P A G I N G S Y N C O N
I N 1 -> O U T 1
P : Selects OUT.
: Confirms the setting.
(p.60-A19)
S Y N C O U T C - O U T 0 1
P : 01 to 12
54