Operating - Kyutec HD Kulicam Manual De Instrucciones

OPERATING

1.2. POWER ON AND START RECORDING
Press and hold the ON-OFF button for 3 seconds and then release. The LED will
automatically turn to blue and the pen will start recording video.
3. STOP RECORDING
Press the ON/OFF button again to stop recording. Now the device will save the footage. The
status light will turn to orange indicating standby mode.
Please notice:
Once activated, the device needs a short period of time to boot up. Do not press the ON/OFF
button during that procedure. The time to boot up the system depends on the storage size of
the device.
The more storage the device used, the more time the boot up procedure will take. In order to
ensure good sound effect of recording, do not block the microphone hole.
20