Tabla de contenido
Publicidad
Volver a instalar la puerta izquierda del refrigerado
1. Descender la puerta hacia la mitad de la bisagra..
2. Coloque la bisagra superior en los agujeros del
montaje y alinear a la posición correcta antes de
apretar, gire la bisagra superior hacia la derecha para
If the refrigerator doors are not
If the refrigerator doors are not
properly aligned:
properly aligned:
fijar la bisagra.
Conectar el cable y el tubo de agua.
WARNING
WARNING
Risk of electric shock!
Risk of electric shock!
Before removing the top panel:
Before removing the top panel:
1. Shut off the water supply to the
1. Shut off the water supply to the
appliance.
appliance.
2. Unplug the appliance or switch
2. Unplug the appliance or switch
off the fuse.
off the fuse.
1. Determine which refrigerator door
1. Determine which refrigerator door
needs adjustment.
needs adjustment.
2. Remove the five screws on the top
2. Remove the five screws on the top
3. Atornillar la bisagra superior en posición con un
panel.
panel.
destornillador.
3. Raise the panel.
3. Raise the panel.
4. Loosen the screw.
4. Loosen the screw.
Do not remove the screw!
Do not remove the screw!
5. Move the hinge sideways to adjust
5. Move the hinge sideways to adjust
the refrigerator door.
the refrigerator door.
6. Tighten the screw.
6. Tighten the screw.
7. Realign panel.
7. Realign panel.
8. Insert and tighten the five screws.
8. Insert and tighten the five screws.
INStALACIoN DEL rEFrIGErAtor
Adjusting the freezer
Adjusting the freezer
compartment drawer
compartment drawer
1. Determine which side needs
1. Determine which side needs
adjustment.
adjustment.
2. Loosen the two screws.
2. Loosen the two screws.
Do not remove the screws!
Do not remove the screws!
3. Use the top screw to adjust the
3. Use the top screw to adjust the
freezer compartment drawer.
freezer compartment drawer.
4. Tighten the two screws.
4. Tighten the two screws.
Installing the handles
Installing the handles
Do not install the handles until the
Do not install the handles until the
appliance is installed in its designated
appliance is installed in its designated
location and is level.
location and is level.
All handles are the same and are
All handles are the same and are
installed in the same manner.
installed in the same manner.
1. Remove the protective films from
1. Remove the protective films from
the refrigerator doors and the
the refrigerator doors and the
freezer compartment drawer.
freezer compartment drawer.
Volver a instalar la puerta izquierda del refrigerado
1. Descender la puerta hacia la mitad de la bisagra.
2. Coloque la bisagra superior en los agujeros del
montaje y alinear a la posición correcta antes de
If the refrigerator doors are not
If the refrigerator doors are not
properly aligned:
properly aligned:
apretar, gire la bisagra superior hacia la derecha para
2. Insert the door handles into the
2. Insert the door handles into the
guides.
guides.
fijar la bisagra.
WARNING
WARNING
� Refrigerator doors: The handle
� Refrigerator doors: The handle
screws must face the center of
screws must face the center of
the appliance.
the appliance.
Risk of electric shock!
Risk of electric shock!
� Freezer compartment drawer:
� Freezer compartment drawer:
Before removing the top panel:
Before removing the top panel:
The handle screws must face
The handle screws must face
down.
down.
1. Shut off the water supply to the
1. Shut off the water supply to the
appliance.
appliance.
2. Unplug the appliance or switch
2. Unplug the appliance or switch
off the fuse.
off the fuse.
1. Determine which refrigerator door
1. Determine which refrigerator door
needs adjustment.
needs adjustment.
2. Remove the five screws on the top
2. Remove the five screws on the top
3. Atornillar la bisagra superior en posición con un
panel.
panel.
destornillador.
3. Raise the panel.
3. Raise the panel.
3. Tighten the handle screws with the
3. Tighten the handle screws with the
accompanying Allen wrench.
accompanying Allen wrench.
4. Loosen the screw.
4. Loosen the screw.
Do not remove the screw!
Do not remove the screw!
Installing the base plate
Installing the base plate
1. Remove the three screws on the
1. Remove the three screws on the
appliance.
appliance.
2. Mount the base plate.
2. Mount the base plate.
5. Move the hinge sideways to adjust
5. Move the hinge sideways to adjust
3. Insert the three screws and
3. Insert the three screws and
the refrigerator door.
the refrigerator door.
tighten.
tighten.
6. Tighten the screw.
6. Tighten the screw.
7. Realign panel.
7. Realign panel.
55
8. Insert and tighten the five screws.
8. Insert and tighten the five screws.
en-us
en-us
Adjusting the freezer
Adjusting the freeze
compartment drawer
compartment drawe
1. Determine which side nee
1. Determine which side n
adjustment.
adjustment.
2. Loosen the two screws.
2. Loosen the two screws
Do not remove the screws
Do not remove the scre
3. Use the top screw to adju
3. Use the top screw to a
freezer compartment draw
freezer compartment d
4. Tighten the two screws.
4. Tighten the two screws
Installing the handles
Installing the handle
Do not install the handles unt
Do not install the handles
appliance is installed in its de
appliance is installed in its
location and is level.
location and is level.
All handles are the same and
All handles are the same a
installed in the same manner
installed in the same man
1. Remove the protective film
1. Remove the protective
the refrigerator doors and
the refrigerator doors a
freezer compartment draw
freezer compartment d
Publicidad
Tabla de contenido
