Operating The Device; Operating Principle - Weller WXD 2 Manual De Instrucciones

8-21
2
1
16
13
Keys
Control key 1, 2, 3,
4
Press and hold
down keys 16 and 1
or 2
Press and hold
down keys 6 and 3
or 4
Selection key 6, 16 Briefly press key 6 or 16 once − Select auxiliary device, this being a
Key 6
Turn-and-click
wheel 7
Enter key 8
*) see also overview diagrams (Fig. 1 and Fig. 2).
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com

6 Operating the device

6.1

Operating principle

Fig. 6: Control elements on the WXD 2
Operation
Briefly press key 1, 2, 3 or 4
once
Press and hold down key 1, 2,
3 or 4
for 3 sec.
Press and hold down keys 1
and 2 or 3 and 4
simultaneously
keys 16 and 1 or 16 and 2
simultaneously
keys 6 and 3 or 6 and 4
simultaneously
Press and hold down keys 6
and 16 for 3 sec.
Briefly press key 6 once
Move your finger over the
turn-and-click wheel
Click left or right
Briefly press key 8 once
Function
The fixed temperature (28/29/37/38)* becomes
the active set-point temperature (31/35)*.
(tool channel: key 1, 2 = left; key 3, 4 = right)
− Scroll within the Parameter menu
− The active set-point temperature is saved as
the fixed temperature under the key being
pressed (1, 2, 3 or 4).
− 1 and 2 = left channel (15)* is disabled or
opened
− 3 and 4 = right channel (9)* is disabled or
opened
− Open Parameter menu
− Open Parameter menu
requirement for opening the parameter
settings of the auxiliary device (e.g. WFE)
− The set-point temperature window opens
− Exit parameter menu
− Select/set value
− Navigate within a menu
− The set-point temperature window opens for
the soldering tool connected on the left/right
− Confirm value/selection
WXD 2
3
4
5
6
7
8