Compliance­wIth­ROhs­DIrective; Package Information; Technical Data - Grundig M 2000 BT Manual De Instrucciones

INFORMATION
Compliance­with­the­WEEE­Direc-
tive­and­Disposing­of­the­Waste­
Product:­
This product complies with EU WEEE Directive
(2012/19/EU). This product bears a classifica-
tion symbol for waste electrical and electronic
equipment (WEEE).
This product has been manufactured
with high quality parts and materials
which can be reused and are suitable
for recycling. Do not dispose of the
waste product with normal domestic
and other wastes at the end of its service life.
Take it to the collection center for the recycling of
electrical and electronic equipment. Please con-
sult your local authorities to learn about these col-
lection centers.
Compliance­with­RoHS­Directive
The product you have purchased complies with
EU RoHS Directive (2011/65/EU). It does not
contain harmful and prohibited materials speci-
fied in the Directive.
Package­information
Packaging materials of the product
are manufactured from recyclable ma-
terials in accordance with our Na-
tional Environment Regulations. Do
not dispose of the packaging materials together
with the domestic or other wastes. Take them to
the packaging material collection points desig-
nated by the local authorities.
­ - -----------------------------------------------------------------------------------------------------------------
Technical­data
EU, 2009/125/ EC and 2011/65/EU.
You can find the CE declaration of conformity for
the device in the form of a pdf file on the Grundig
Homepage www.grundig.com/downloads/doc.
electrical earth.
The type plate is located on the bottom of the
hi-fi system.
System
Power­supply
Operating voltage: 220 - 240 V ~
Mains frequency: 50 - 60 Hz
Rated power consumption: 25 W
Power consumption (ECO mode): ≤ 0.5 W
Amplifier­unit­
Output:
Sine wave power: 2 x 25 W
Loudspeaker impedance: 4 Ω
Signal-to-noise ratio: ≥ 80 dBA
Receiver­unit
Reception range: FM: 87.5 ...108.0 MHz
BT Max. transmitted power: 13dBm
BT Frequency: 2402MHz – 2480MHz
BT Firmware version: 120201
BT Hardware version: V01A
CD­unit
Frequency response: 30 Hz ... 20 kHz
Noise voltage ratio: ≥ 96 dBA
This device is noise-suppressed
according to the applicable EU
directives. This product fulfils the
European directives 2014/53/
This equipment is a Class II or double
insulated electrical appliance. It has
been designed in such a way that it
does not require a safety connection to
ENGLISH
33­