Porcelanosa SYSTEM-POOL Manual De Instalación página 10

QUADRI
Shower sets
NB: Install the gaskets that are supplied with the roof on
the sides of the fixed and sliding glass panels (fig. 11).
19. Install the right and left sliding doors. To do this, first
insert the two top rollers into the top profile (zoom
9), and then repeat the operation with the bottom pro
file (zoom 10).
If the doors are not fitting properly, turn the adjusting
screws on the rollers accordingly.
20. To level the doors, turn the adjusting screws on the
top rollers. Once level, tighten the screws on the
rollers using an Allen wrench.
21. Now turn the adjusting screws on the lower rollers
so that the doors slide backwards and forwards gently
but remain in the bottom guide track. Once the doors
are level, tighten the screws on the rollers using an
Allen wrench.
22. Insert the trim covers on the top and bottom rollers.
gasket with
INSTALLING SOAP DISPENSERS
x 2
We recommend positioning the soap dispensers at the heights
indicated in fig. 13.
long fi n
gasket with
short fi n
Fig.11
nº3
3,5 x 25
x4
ZOOM 9
trim cover
x2
Installation Manual
ZOOM 10
Fig.13