Porcelanosa SYSTEM-POOL Manual De Instalación página 9

Installation Manual
ASSEMBLING THE CUBICLE:
ZOOM 3
12. Position the profiles as indicated in zoom 3.
13. Make sure that the profiles are level and screw them to
the wall.
nº6
4,2 x 32
x6
3.5 x 19
x2
nº3
ZOOM 7
trim cover trim cover
ZOOM 5
nº3 nº3
ZOOM 8
nº3
4.2 x 13
ZOOM 6
x10
3,5 x 13 3,5 x 13 3,5 x 13 3,5 x 13
nº3
Fig.8
14. Fit the cubicle to the compensation
profiles as indicated in fig.
15. Once level, make drill holes for the
marks on the compensation profiles, and
complete the installation by inserting and
tightening the screws, zoom 4.
16. Position the bottom profile as indicated
in zoom 5, make the corresponding drill
holes and screw into position (zoom 6).
17. Install the top bracket – ensuring a
perfect fit – (zoom 7) and then make
the drill holes in the positions indicated
in zoom 8. Now screw into position.
18. Once level, make drill holes for the
marks on the remaining side profile
and then screw in the rest of the
assembly (zoom 4).
ZOOM 4
8