Unit Conversion; Tare Function - senya SYCP-KS023 Manual De Instrucciones

III- USE
Before use, place the scale on a solid, level surface. Place any container or bowl on the scale
before operation.
Operation
1. Gently press the
2. The scale LCD display will show its start routine of segment as it powers on.
3. Wait until the "0" is shown on the display.
4. Place the item to be weighed on the scale (or in the bowl if required). The LCD will
show the weight reading.
5. After weighing press the
leave the scale and it will automatically power off in 2 minutes.
Mode Conversion
The scale is with three weighing modes. To measure different items, users can select
required weighing mode by pressing the "UNIT"
mode, weight mode, milk volume mode or water volume mode. At the left corner of the LCD
screen, it shows the status of the weighing modes (see the Part II.1 GLOBAL DESCRIPTION OF
THE PRODUCT).

Unit Conversion

If the scale is with unit systems of Metric (g, ml) and Imperial (lb:oz, fl'oz), users can select
units from g to lb:oz or ml to fl'oz.
While the scale is on, select the required unit by pressing the
the desired unit is shown, g/lb:oz or ml/fl'oz.

Tare function

The tare Function allows you to weigh another item consecutively after weighing the first
item without removing it from the scale.
1. Gently touch the
2. The scale LCD display will shows its start routine of segment asit powers on
3. Wait until the "0" is shown on the display. Put the container on the scale platform
4. The LCD display will show the steady weight of the container
5. Touch the
6. The upper-left corner will show icon
7. Add the ingredients into the container
button to turn on the scale.
button for three seconds to turn off the scales. Or
button to turn on the scale
button to clear the weight of the container (reset to zero)
button to convert the desired weighing
button for 3 seconds until
, it means te tare function is activated