Error Indication - senya SYCP-KS023 Manual De Instrucciones

8. The LCD will show the weight of the ingredients only. Repeat touching the
button to weight new different ingredients
Negative value
The display will show a negative value (see LCD functions) if a weight has been removed
from the scale. Please press the
show "0" again.

Error Indication

The "Lo" symbol on the display indicates that the battery power is running

low. Please replace new battery;
The "Err" symbol on the display indicates that the scale is over-loaded.

Please step off to avoid possible damage to the product.
IV- ADVICE FOR USE AND CARE
 Put the scale on a clean and flat table.
 The maximum weight of the scale is 5 kg, which included the weight before tare.
 To ensure the life of the scale, do not put the scale under wet, hot & cold condition.
 The scale is a high precision electronic weighing product, please do not press or drop
the scale otherwise it is easy to be damaged.
If the scale surface is dirty, please clean the scale with soft cloth, do not use any

chemical detergent and allow water to get inside the scale.
 The product is for small goods weighing only, do not use for legal trade.
 If the result appears improperly, please check whether the batteries and the touching
point contact well. Replace for new batteries if used for a long time already, and then try
again. If necessary, contact your local distributor or the manufacturer.
button to clear the negative value, the display will