Volumes; Simple Pythagoras - Parkside PLEM 50 B2 Manual De Instrucciones

Volumes

1. Press the Function button
uring mode indication symbol
2. Now measure the length, width and height of the volume to be
measured by pressing the MEAS button
ing line of the volume icon flashes on the display for the indi-
vidual measurement values. Right after the third measurement,
the calculated volume will be shown on the bottom row
the display and the corresponding line of the volume icon
stops flashing on the display. Length, width and height will be
shown on the top three rows of the display orderly.

Simple Pythagoras

Pythagoras Theorem describes the dependence of the lengths of
the sides in a right-angled triangle as follows: a² + b² = c², where
a and b are the legs and c the hypotenuse of the triangle. Using
the "Simple Pythagoras" function, it is possible to calculate the
length of one of the legs. This feature is particularly useful for
poorly accessible measurement points.
1. Press the Function selection button
Pythagoras" triangle icon of measuring mode indication sym-
bol appears on the display.
25
2. Now measure the hypotenuse (largest distance) and one of the
legs (shortest distance to the measurement surface) by pressing
the MEAS button
Pythagoras" icon flashes for the individual measurement values.
106 GB/MT
twice. The volume icon of meas-
15
25
. The corresponding line of the "Simple
16
appears on the display.
. The correspond-
16
three times. The "Simple
15
of
23