E - Using The Product On A Smartphone - THOMSON DSC - 323W Manual Del Usuario

E - uSiNg ThE prOduCT ON A SMArTphONE

The free application used to control, configure and
view the cameras remotely on your smartphone
is available from the Appstore and Google Play.
Download, install and run the 'ThomView' app.
Although we have described how the Android app
works here, the same applies to the iPhone.
• Run the application on your smartphone or
tablet, then click on the
the icon.
This will activate the phone's camera so that
you can scan in the QRCode.
• Next, enter the name you want to give
your camera (Device Name), its user name
(Username) and its password (Password). The
default username is "admin" and there is no
pre-set password.
• Click on OK to confirm, then click on the name
of your camera. Next, click on the
icon to display your camera feed.
Note: there is a setting in the application that lets
you enable connections to the camera only when
the smartphone or tablet is connected via WiFi and
not over the mobile data network.
Tick or untick 'Only connect in Wi-Fi network' as
12
EN
720P HD WiFi iP Camera
icon. Next, click on
Video
required using the More icon under 'Settings'.
Many of the configuration options can be accessed
by clicking on your camera video feed:
2
3
4
5
6
8
7
1 If several cameras have been registered
to the app, simultaneous viewing is possible
2 General camera configuration: WiFi,
username and password, night vision, etc.
3 If night vision is not set to auto,
lets you switch the camera's infrared lights
on or off
4 Not used on this model
5 Enable the camera microphone
6 Activate the camera loudspeaker
7 List of cameras recognised by the app
8 Display live video feed of selected camera
9 Not used on this model
10 Not used on this model
11 Not used on this model
12
Snapshots and videos saved on the phone
13 Take snapshot (saved on the phone)
14 Event and alert log
15 Start/stop video (saved on the phone)
16 Smartphone app options
1
9
10
11
13
15
14
16
12