eLine Arion DIGITAL Instrucciones Para El Uso página 29

1) Prolonged exposure to direct sunlight can cause
direct sunlight.
cloth. Do not use solvents or harsh detergents.
3) If the ARION DIGITAL is not going to be used for a
prolonged period, release the drive belt, bringing it out
of its seat, or close it, otherwise the belt's tension
4) The coupled bearings on the roller do not require
damage the plastic frame.
6) Do not leave the charger connected to the roller.
7) In case of wear or breakage of the drive belt, replace
A) Remove the rectangular covers (C) from both front
longitudinal members (with aid of a screwdriver if
C) Undo the fixing screw located on the longitudinal
member on the side opposite the magnetic resistance
of the middle roller G (Fig.19).
D) Replace the belt, refit the rollers in their correct
seats and secure all the screws again.
E) Position the rectangular cover on its seat.
8) Drive belts and other spare parts for the ARION
ATTENTION
roller during use, since the moving and rotating parts of
contact.
of inadvertent or accidental contact with them.
come to a stop.
waterproof. Make sure sweat does not come into
contact with it, as this could damage the electronic
circuit.
places. The electronic components could become
damaged.
directives if the power adapter supplied is not used.
wait until the speed value indicated is "-.-". Then keep
seconds. This will restart the receiver module and the
connection should be restored.
will restart the receiver module and the data should be
resistance unit again.
computer and the chest band again.
If the message "AP2 error" appears on the screen, it
EN
25