Warranty - Munters EM Serie Manual De Uso Y Mantenimiento

• for an exact reset sequence, refer to the
instructions given in in section 'Control devices'.

7. Warranty

Munters products are designed and built to provide
reliable and satisfactory performance but cannot be
guaranteed free of faults; although they are reliable
products they can develop unforeseenable defects
and the user must take this into account and arrange
adequate emergency or alarm systems if failure to
operate could cause damage to the articles for which the
Munters plant was required: if this is not done, the user is
fully responsible for the damage which they could suffer.
Munters extends this limited warranty to the first
purchaser and guarantees its products to be free from
defects originating in manufacture or materials for one
year from the date of delivery, provided that suitable
transport, storage, installation and maintenance terms
are complied with. The warranty does not apply if
the products have been repaired without express
authorisation from Munters, or repaired in such a way
that, in Munters' judgement, their performance and
reliability have been impaired, or incorrectly installed,
or subjected to improper use. The user accepts total
responsibility for incorrect use of the products.
The warranty on products from outside suppliers fitted
to EM/EMS/EDHE/EDSHE/EC, (for example electric
motors, belts, etc.) is limited to the conditions stated by
the supplier: all claims must be made in writing within
eight days of the discovery of the defect and within 12
months of the delivery of the defective product. Munters
has thirty days from the date of receipt in which to take
action, and has the right to examine the product at the
customer's premises or at its own plant (carriage cost to
be borne by the customer).
Munters at its sole discretion has the option of replacing
or repairing, free of charge, products which it considers
defective, and will arrange for their despatch back to
the customer carriage paid. In the case of faulty parts
of small commercial value which are widely available
(such as bolts, etc.) for urgent despatch, where the cost
of carriage would exceed the value of the parts, Munters
may authorise the customer exclusively to purchase the
replacement parts locally; Munters will reimburse the
value of the product at its cost price.
Munters will not be liable for costs incurred in
demounting the defective part, or the time required to
travel to site and the associated travel costs. No agent,
employee or dealer is authorised to give any further
guarantees or to accept any other liability on Munters'
behalf in connection with other Munters products, except
in writing with the signature of one of the Company's
Managers.
In the interests of improving the quality of its
!
products and services, Munters reserves the
right at any time and without prior notice to
alter the specifications in this manual.
The liability of the manufacturer Munters ceases in the
event of:
• dismantling the safety devices;
• use of unauthorised materials;
• inadequate maintenance;
• use of non-original spare parts and accessories.
Barring specific contractual terms, the following are
directly at the user's expense:
• preparing installation sites;
• providing an electricity supply (including the
protective equipotential bonding (PE) conductor,
in accordance with CEI EN 60204-1, paragraph
8.2), for correctly connecting the equipment to the
mains electricity supply;
• providing ancillary services appropriate to the
requirements of the plant on the basis of the
information supplied with regard to installation;
• tools and consumables required for fitting and
installation;
• lubricants necessary for commissioning and
maintenance.
It is mandatory to purchase and use only original spare
parts or those recommended by the manufacturer.
Dismantling and assembly must be performed by
qualified technicians and according to the manufacturer's
instructions.
The use of non-original spare parts or incorrect assembly
exonerates the manufacturer from all liability.
Requests for technical assistance and spare parts must
be made directly to the manufacturer, at the following
address:
© Munters AB, 2013 11