Using The "External Button; Programming The Locking And Unlocking Of The Memory; Using The "Memorised Transmitter - Nice TTD0110 Instrucciones Y Advertencias Para La Instalación Y El Uso

4.5.2 - Using "External Button":
OFF ON
01.
02.
green
LED
03.
green
LED
3 sec. =
Adjusting the brightness of the lamp to the desired
04.
value using the external push button:
1st long press on the external button
= increase in brightness until you release the button
2nd long press on the external button
= decrease in brightness until you release the button
CAUTION! = "Toggle" function (ON/OFF)
05.
desired light
intensity value
3 sec. =
green
LED
3 sec. =
at the 2nd
= 2
5 seconds
06.
Level 1
Level 2
Level 3
Level 4
07.
08.
09.
2
green LED: memorising OK

4.6 - Programming the locking and unlocking of the memory

4.6.1 - Using "Memorised Transmitter":
This procedure can only be done using a transmitter already memo-
rised in "Mode 1".
+
01.
select the desired level
green LED +
5 seconds
no. of ... flashes according to
the chosen level
green LED
3 sec. =
1
green LED
x 1
x 2
x 3
x 4
English – 11