To be integrated with a complete reading of the technical specifi cations
Positioning and installing
•
First ignition performed by authorised CAT who released the guarantee certifi cate
•
Air vent in the room
•
Only the stove outlet passes through the smoke channel/chimney fl ue
•
Features of the smoke channel (stretch of duct connecting the stove to the fl ue/chimney):
•
• Chimney pot that is high enough to avoid downdraft areas
• The discharge pipes are made of a suitable material (stainless steel is recommended)
• When using any fl ammable materials (e.g. wood), all precautions have been taken to prevent a fi re hazard
Use
• Good quality, dry pellets are used
• The chimney pot and ash compartment are clean and well positioned
• The door is closed properly
• The combustion chamber is inserted properly into the relevant compartment
REMEMBER TO VACUUM THE COMBUSTION CHAMBER BEFORE EACH IGNITION
Should ignition fail, DO NOT re-ignite until you have emptied the combustion chamber.
TELEPHONE DIALLER FOR REMOTE IGNITION (code 762210)
The stove can be ignited remotely by asking the DEALER to connect the telephone combiner to the serial port behind the stove via the
optional cable (code 640560).
DUCTING KIT (code 758510) to be installed by the Authorised Technical Assistance Centre
KIT 11 for channelling hot air into an adjacent room, with max channelling pipe length 1.5 m (code 645700).
KIT 11 BIS for channelling hot air into a non-adjacent room, with max channelling pipe length 5 m (code 645710).
REMOTE CONTROL code 633280
GlassKamin
Used for cleaning the
ceramic glass
CHECK LIST
a maximum of 3 curves,
a maximum 2 horizontal metres
OPTIONAL
CLEANING ACCESSORIES
- 37
-
Ash vacuum cleaner
User for cleaning the hearth