Sonicbridge™ / Lamp Switch - HomeAware HA360MK Guia Del Usuario

SONICBRIDGE™ / LAMP SWITCH
The HomeAware™ SonicBridge™ module HA360BU allows
traditional Sonic Alert receivers to work with the new
HomeAware™ D-RF Secure™ system. The HomeAware™ is
the only wireless system available that is compatible with all
Sonic Alert remote receivers including the SA101, SA201,
BL300, RH100 and SB1000 alarm clock. It also has the added
feature of allowing a lamp to be plugged into it to allow for a
flashing lamp option. To install the SonicBridge™ follow the four
steps below.
1. Simply plug the SonicBridge™ into any 120v outlet (do not
plug into extension cords, power strips or surge protectors)
must be plugged directly into the outlet for the best receiver
reception.
2. Plug the opposite end into the back of the HomeAware™
Main unit where it says Lamp SW.
30