PLEASE CHECK BEFORE CALLING FOR SUPPORT
▼ When there is a malfunction with the product, check the following matters before contacting our customer service center.
Problem
When "
" appears when
you press a button
When a button such as the
PRESSURE COOK button or
the PRESET button won't
work and "
" appears
When the product smells odd
right after cooking or during
the Keep Warm mode
When the Cover won't be
closed
When "
" appears
When "
" appears
When "
" appears
26
Checklist
•Is the Inner Pot put in the product?
•Did you use the power properly?
•Did you turn the Cover Handle to "
•Is the Lock lamp turned on?
•Did you completely clean the product after
cooking?
•Is the Cover handle completely turned to "
(Open)?
•Is there hot food in the Inner Pot?
•Is the Inner Pot completely in the Main Frame?
•This indicates that the Environmental Sensor
fails to work.
•This indicates that there is an error with the
internal memory of MICOM.
•This indicates that there is an error with the
internal memory of MICOM.
Recommended Actions
•The buttons won't work without the Inner Pot inside in
the product. Put the Inner Pot inside the product.
•This product is exclusively for 120V.
Use the power property.
•Completely turn the Cover Handle to "
" (Lock)?
If the Cover Handle is not completely fastened, the
PRESSURE COOK button and the PRESET button
won't work.
•Refer to page 12, 13 and completely clean the
Removable Cover and the pressure packing before use.
•Completely turn the Cover Handle to "
"
then close the Cover again.
•Bend the Pressure Weight, and then close the Cover.
•Turn the Inner Pot Handle attached to the Inner Pot to
both left and right sides, and secure it on the Main
Frame completely.
•Shut off the power supply, and contact our customer
service center.
•Shut off the power supply, and contact our customer
service center.
•Shut off the power supply, and contact our customer
service center.
" (Lock).
" (Open) and