Preset Sync; Reset Functions; Factory Reset - Chauvet Professional MAVERICK MK2 WASH Manual De Instrucciones

Preset Sync

To sync all menu presets to other Maverick MK2 Washes, follow the instructions below:
1. Connect all Maverick MK2 Washes via DMX cable.
2. Navigate to the Setup
3. Use <UP> or <DOWN> to select Preset Sync, or touch the display where it says Preset Sync.
4. If using the buttons instead of the touchscreen, press <ENTER>.
5. Select YES or touch the display where it says the desired option.
6. Press <ENTER>.
• To sync other Maverick MK2 Washes, you connect those products by a DMX
cable.
• The product can be in any control mode except WDMX. ArtNet, DMX, sACN are
all acceptable.
• All menu options are transferred, including the DMX address. Only the IP
address in not affected in the other products.
Only connect Maverick MK2 Washes.

Reset Functions

To reset the pan, tilt, or all functions as if from startup:
1. Navigate to the
2. Use <UP> or <DOWN> to select Reset Function, or touch the display where it says Reset
Function.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select the function to reset, from Pan, Tilt, or All, or touch the display
where it says the desired option.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from NO (do not reset) or YES (reset), or
touch the display where it says the desired option.
7. Press <ENTER>.

Factory Reset

To restore the Maverick MK2 Wash to factory default settings, do the following:
1. Navigate to the
2. Use <UP> or <DOWN> to select Factory Settings, or touch the display where it says Factory
Settings.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory
settings), or touch the display where it says the desired option.
5. Press <ENTER>.
Page 47 of 275
menu.
Setup menu.
Setup menu.
Maverick MK2 Wash User Manual Rev. 10
Operation