Installation; Hardwire Installation - Dimplex CDFI-BX1500 Manual Del Propietário

Installation

WARNING:
INSTALLATION AND
SERVICE WORK SHOULD BE
PERFORMED BY QUALIFIED AND
AUTHORIZED PERSONNEL. ALL
INSTALLATIONS MUST COMPLY
WITH ALL LOCAL CODES AND
BY-LAWS, AND INSPECTED AND
APPROVED FOR OPERATION BY
LOCAL GOVERNING AUTHORITY
PRIOR TO USE.
WARNING: Construction and
electrical wiring must comply
with local building codes and
other applicable regulations to
reduce the risk of fire, electric
shock and injury to persons.
Opti-myst Cassette
The Opti-myst Pro Box Heater works
exclusively with the Opti-myst
Cassette (CDFI1000-PRO and
CDFI500-PRO). Controls for the
heater are found on the
CDFI500-PRO cassette.
New Construction
When determining a location for the
Opti-myst Pro Box Heater, ensure
®
that the unit will not be susceptible to
drafts, vents, ceiling fans and other
air currents. Similar to a candle,
large movements of air will affect the
unit's ability to create and maintain
the flame effect.
6
ANY

Hardwire Installation

The Opti-myst Pro Box Heater is
supplied in an assembled state
and is designed to be permanently
installed. The unit comes ready for
hardwire installation.
WARNING:
to wire your own new outlets or
circuits. To reduce the risk of
fire, electric shock or injury to
persons, always use a licensed
electrician.
!
NOTE: Please read all
instructions before
1. For rough in framing, the
opening should follow the
recommended dimensions
located in Figure 1.
!
NOTE:
Dimensions provided
are minimum clearances and
will vary depending on type of
support framing and finishing
options.
!
NOTE:
Framing should be
constructed to support 160 lbs
(73 kg)
WARNING:
risk of fire, do not store or use
gasoline or other flammable
vapours or liquids in the vicinity
of the unit.
Do not attempt
installing.
To reduce the
www.dimplex.com