Setup Functions - Honeywell LUTRON LR-HWLV-HVAC TouchPRO Wireless Guia De Instalacion

Installer setup

Setup functions

0170 System type
0173 Heat pump type
0180 Fan control
(heating)
0190 Changeover valve
(O/B terminal)
0200 Auxiliary Heat
0210 External Fossil Fuel
Kit
0220 1st Stage Cool/
Compressor cycle rate
0230 2nd Stage Cool/
Compressor cycle rate
0240 First stage heat
cycle rate (CPH=
cycles per hour)
0250 Second stage heat
cycle rate (CPH)
0260 Third stage heat cycle
rate (CPH)
0280 Backlight
P/N 041-338 Rev. C
Settings & Options
1 1 heat/1 cool conventional
2 1 heat/1 cool heat pump (no aux. heat)
3 Heat only (2-wire systems)
4 Heat only with fan
5 Hot water Series 20 system (power to open & close zone
valves/normally open zone valves)
6 Cool only
7 2 heat/1 cool heat pump (with aux. heat)
8 2 heat/2 cool multistage conventional
9 2 heat/1 cool multistage conventional
10 1 heat/2 cool multistage conventional
11 2 heat/2 cool heat pump (no aux. heat)
12 3 heat/2 cool heat pump (with aux. heat)
0 Air to air heat pump
1 Geothermal heat pump
0 Gas/Oil heat (equipment controls heating fan)
1 Electric furnace (thermostat controls heating fan)
0 O/B terminal controls valve in cooling
1 O/B terminal controls valve in heating
0 Electric backup heat
1 Fossil fuel backup heat
0 None
1 Yes
3 Recommended for most compressors
[other options: 1, 2, 4, 5, or 6 CPH]
3 Recommended for most compressors
[other options: 1, 2, 4, 5, or 6 CPH]
5 Gas or oil furnaces of less than 90% efficiency
1 Steam or gravity systems
3 Hot water systems & furnaces of 90%+ efficiency
9 Electric furnaces
[Other options: 2, 4, 6, 7, 8, 10, 11, 12 CPH]
5 Gas or oil furnaces of less than 90% efficiency
1 Steam or gravity systems
3 Hot water systems & furnaces of 90%+ efficiency
9 Electric furnaces
[Other options: 2, 4, 6, 7, 8, 10, 11, 12 CPH]
9 Electric auxilliary heat
1 Steam or gravity systems
3 Hot water systems & furnaces of 90%+ efficiency
5 Gas or oil furnaces of less than 90% efficiency
[Other options: 2, 4, 6, 7, 8, 10, 11, 12 CPH]
0 Backlight ON for approx. 45 seconds after keypress
1 Backlight always on low intensity, full bright after keypress
7
TouchPRO Wireless
(factory default in bold)
Continued on next page
®
69-2655EFS—05