Publicidad
Idiomas disponibles
Idiomas disponibles
OWNER'S
RESPONSIBILmES
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MABNTENANCE SCHEDULE
FILL tN DATES AS YOU
COMPLETE
REGULAR SERVICE
MAINTENANCE
TASK
PRESSURE
WASHER
Check/dean
water inlet screen
Check high pressure hose
Check detergent
hose
Check spray gun and assembly
for leaks
Purge pump of air and contaminants
Change pump oil
Prepare pump for storage below 32°F
ENGINE
Before
Each Use
X _
x
x
x
x
SERVICE DATES
Every 25
Hours or
Yearly
Every 50
Every 100
Hours or
Hours or
Yeady
Year y
×
See Storage on pages 18-19.
Yearty
SERVICE DATES
Check oil level
Clean debris
Change engine oit
Service air cleaner
E
Service spark plug
Service spark arrester
C_ean
cooling
system
Check
valve
clearance
Prepare for storage
1
2
x
x
X _
x
x 2
If unit is to remain idle for longer than 30 days
Clean if clogged. Reptace if perforated or torn.
Change oil after the first (5) operating hours and every 50 hours or yearly thereafter.
Change sooner when operating under dirty or dusty conditions.
RepIace more often under dirty or dusty conditions.
GENERAL
RECOMMENDATIONS
Regular maintenance will improve the performance
and extend the life of the pressure washer. See any
authorized Sears dealer for service.
The pressure washer warranty does not cover items
that have been subjected to operator abuse or
negligence. To receive full value from the warranty,
the operator must maintain pressure washer as
instructed in this manual including proper storage as
detailed in "Storage" on pages 18-19.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
All service and adjustments should be made at least
once each season. Follow the requirements
in the
"Maintenance Schedule" chart above.
NOTE: Once a year you should clean or replace the
spark plug and replace the air filter. A new spark plug
and clean air filter assure proper fuel-air mixture and
help your engine run better and last longer.
if equipped with inflatable tires, keep the air pressure
at the value marked on the tire or within 15 and 40 psi.
EMISSION
CONTROL
Maintenance, replacement or repair of the emission
control devices and systems may be performed by any
non-road engine repair establishment
or individual.
BEFORE
EACH USE
1.
Check engine oil level.
2.
Clean debris.
3.
Check water inlet screen for damage.
4.
Check in-line filter for debris.
5.
Check high pressure hose for leaks.
6.
Check chemical filters for damage.
7.
Check gun and nozzle extension assembly for
leaks.
8.
Purge pump of air and contaminants.
13
Publicidad
