Maintenance And Storage - KRATOS SAFETY FA 70 028 11 Manual De Instrucciones

INSPECTION:
The recommended service life of the equipment is 10 years (in accordance with the annual examination by a competent person authorised by KRATOS
SAFETY), but it may be increased or reduced according to use and/or the results of the annual inspections.
The lanyard should be inspected if there is any doubt, or following a fall and at least annually, by the manufacturer or a competent person authorised
by the manufacturer to check its strength and hence the user's safety. The product data sheet should be completed (in writing) after each verification.
The date of inspection and date of the next inspection must be indicated on the data sheet. It is also recommended to put the date of the next inspection
on the product.
MAINTENANCE AND STORAGE: (These instructions must be strictly observed)
During transportation, keep the lanyard away from any cutting edges and keep it in its packaging. Clean with water, wipe with a cloth and hang in a
ventilated room to dry naturally, ensuring that it is away from any direct light or source of heat; the same applies for elements that may have got wet
during use. The lanyard must be stored in its packaging in a cool, dry and ventilated room. Make sure to keep it away from heat sources.
6