Selecting The Video For The Display Independently; Selecting The Audio For Built-In Speaker - Pioneer AVD-W6010 Manual Del Usuario

Basic Operation

Selecting the Video for the Display Independently

1. Set so that only the display video can be selected.
Hold for 2 seconds
2. Press V.SEL button.
Each press of the V.SEL button selects the desired video source in the following order:
[VCR1] = [VCR2] = [RGB] = Exit to [VCR1]
Note:
• Return to the setting for switching all source at the same time, press the V.SEL button for 2 seconds.
• If you press the V.SEL button when video source are switched with the SEL/POWER button,
[SELECTOR] appears in red on the screen, indicating that the audio and video can be switched
simultaneously using the SELECTOR button.
• While switched to forced video from a back-up camera, if you try to select a video source with the
V.SEL button, "INVALID" is displayed, indicating that you cannot switch the video source.
Selecting the Audio for Built-in Speaker Independently
1. Set so that only the built-in speaker audio can be switched.
Hold for 2 seconds
2. Press SP.SEL button.
Each press of the SP.SEL button selects the desired audio source in the following order:
[VCR1] = [VCR2] = [RGB] = Exit to [VCR1]
Note:
• Return to the setting for selecting all source at the same time, press the SP.SEL button for 2 sec-
onds.
• If you press the SP.SEL button when audio are switched with the SEL/POWER button, [SELEC-
TOR] appears in red on the screen, indicating that the audio and video can be switched simultane-
ously using the SELECTOR button.
11
VCR 1
VCR 1
VO L
VCR 1
VCR 1
VO L
1 2
1 2