Gallagher M20 Manual De Instrucciones página 11

Gallagher 3E1803 110V Energizer User Manual
Step 4. Connect the fence
Connect the energizer's red (FENCE) terminal to the fence using double insulated
cable. Remove 2" of plas c coa ng from one end of the cable. Bend the end of
the wire to form a loop. Unscrew the red (FENCE) terminal and insert the loop of
wire between the washers. Screw the terminal closed, ensuring the wire is fi rmly
clamped. A ach the other end of the cable to the fence using a joint clamp.
Step 5. Plug the energizer into a power outlet
Check that the light on the front of the energizer is fl ashing.
Green
To ground
5-Step Installa on Guide
Red
To fence
Light
11