Packing List; Attaching The Shoulder Strap - Earth Wise LPS42410 Manual Del Operario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from the
box. Make sure that all items listed in the packing list are
included.
Inspect the product carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.

PACKING LIST

- Pole Saw
- Battery Pack and Charger
- Chain and Bar
- Blade Cover
- Shoulder Strap
- Operator's Manual
Pole Assembly:
Plug the upper section into the lower section.
Pull the locking collar down over the connection and turn
clockwise to secure the two pieces together.

ATTACHING THE SHOULDER STRAP

Attach the shoulder strap to the strap bracket. Use the
shoulder strap to help support the pole saw while in use.
ASSEMBLY
ADJUSTING LENGTH OF TELESCOPIC POLE
Remove the battery pack from the pole saw.
Lift locking clamp and push poles towards each other to
shorten the pole or pull away from each other to lengthen
the pole.
When desired length is achieved, close the locking clamp to
secure.
Note: Extend the pole only to the length required to reach
the limb to be cut. Do not extend the handle above waist
height.
NOTE: Adjust hand placement on the shaft of the pole saw
to keep proper balance.
Do not attempt to use pole saw at a length which does not
allow you to maintain proper footing and balance at all times.
WARNING: If any parts are damaged or missing do not
operate this product until the parts are replaced. Failure to
heed this warning could result in serious personal injury. Call
1-800-313-5111 for assistance.
WARNING: Failure to lock telescopic pole clamp as directed
could result in personal injury,
3
Locking Clamp Open
Locking Clamp Closed

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Earth Wise LPS42410

Tabla de contenido