Polygroup SUMMER WAVES RX600 Manual Del Usuario página 11

5. Connect the Suction Fitting 2 to the Pump inlet with a Hose and one
Clamp on each end.
7. Tighten all the Clamps to prevent water leakage.
10
4
10
9
9. Vent the Pump: to release the air trapped inside and make sure a smooth
water flow, it's important to vent or depressurize the Pump before each use.
Simply twist counterclockwise to loosen the Vent Screw
pressure will force all the trapped air out. Retighten the Screw when water
starts flowing out.
14
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.
2
10
9
, and the water
12
12
Extended operating days and hours during peak season requirements.
OWNER'S MANUAL
6. Connect the Return Fitting 6 to the Pump outlet with another Hose and
one Clamp on each end.
6
9
Before Using the Pump
8. You can now fill the pool with water up to the FILL LINE.
Do NOT plug the Pump in at this point.
10. To optimize water circulation, twist the RF Diverter
down and away from the Suction Fitting.
Inside Pool Wall
360°
7 so that it faces
11