Drain Hose Connection - Gaggenau GI240760 Guía De Usario

DRAIN HOSE CONNECTION

Figure 19
Figure 21
10
The dishwasher drain hose may be connected to the
drain plumbing in one of four ways:
1. Directly to the undersink dishwasher drain
connection, as shown in Figure 19.
2. Directly to a disposer dishwasher drain connec-
tion, as shown in Figure 20.
3. To the undersink dishwasher drain connection
through an air gap, as shown in Figure 21.
4. To a disposer dishwasher drain connection
through an air gap, as shown on Figure 22.
Information on installing air gaps and disposers can
be found in the Plumbing Preparation section of this
Figure 20
manual.
NOTE: If the dishwasher drain hose is to be con-
nected to a disposer dishwasher drain connection,
remove the plug from the disposer's dishwasher
drain connection.
Use the supplied Rubber Connection Hose and
Drain Hose Clamps (letter G in the Materials
Supplied section of this manual) to connect the
dishwasher drain hose to the plumbing drain
connection. Use the spring clamp to secure the
Rubber Connection Hose to the dishwasher drain
hose. Use the screw clamp to secure the Rubber
Connection Hose to the plumbing drain connection.
If the dishwasher drain hose is connected directly to
either an undersink dishwasher drain connection, as
shown in Figure 19, or to a disposer dishwasher
Figure 22
drain connection, as shown in Figure 20, form a
curve in the dishwasher drain hose and secure a
portion of the curve at least 20" (508mm) above the
cabinet floor.